|
|
|
|
|
This section contains service information related to the hydraulics of the units.
Links to PDF copies of documents below:
H0001 VG32 Neutral Point for Coil Type 157B4112 or 157B4113 - Adjustment Procedure
H0002 Setting the Neutral Point on the Danfoss Control Valve 'PVEM' Coils: Type 157B4116
H0003 Stabiliser Extension Cylinder - Overhauling Procedure
H0004 Procedure for Changing the Hydraulic Pump on MK4 and MK5 Sidelifters
H0005 Danfoss PVG Main Relief Valve Adjustment SB360, SB300, SB330 with Load Sensing
H0006 Procedure for Changing the Hydraulic Pump on SB300, SB330 and SB360 Sidelifters
H0007 Procedure for Changing the Hydraulic Oil
H0008 Pressure Settings and Flow rates for Sidelifters
H0009 High Speed Unloader Valve Hydraulic Logic For SB360, SB300 and SB330 Hydraforce
H0010 Changing Overcentre Cartridge Blocks/Cap Screws
H0011 Checking Hydraulic Pressures - SB300, SB330 and SB360
H0012 Sidelifter Pressure Test
H0013 Refitting Procedure for Piston in Mk6 Bottom Arm Cylinder (Item S6-25801)
H0015 High Speed Unloader Valve Hydraulic Logic For MK6, SB30 and SB33 Integrated
H0016 Refitting Procedure for Piston in Mk6 Bottom Arm Cylinder (Item HC-25806)
H0017 Refitting Procedure for Piston in SB330 Bottom Arm Cylinder (Item HC-25900)
H0018 Setting up 90 and 100% Pressure Switches
H0019 Load Sense Solenoid/Relief Fault
H0020 Cylinder Overhaul Instructions Threaded Head
H0021 Piston Torquing Instructions Compact Extra
H0022 Pump Troubleshooting Guide
H0023 Cylinder Repair and Service
H0024 PTO Return line pressure protection
H0025 Overhaul of Compact S and Super S Series Hydraulic Cylinders Victor Hydraulics
H0026 High Speed Unloader Valve Fault
H0027 SMARTlift Version of PTO Return Line Pressure Protection
H0028 Overhauling Lyco Cylinders