Send Feedback
NT ECU
97 = REAR ECU
Check:
See Also
LCD Error or Warning Screens
Module Angle Sensor Error F78 R79
Stabiliser Angle Sensor Error F25 R26
Bottom Arm Angle Sensor Error F19 R20
Top Arm Pressure Sensor Error F21 R23
Top Arm Angle Sensor Error F11 R18
Stabiliser Down Sensor Error F16 R15
Communication With Front Crane Lost! 60
Communication With Rear Crane Lost ! 61
Low Control System Voltage 62
Road Camber Beyond Safe Working Limit 12
Road Camber Beyond Safe Working Limit 13
Road Elevation Beyond Safe Working Limit 22
Road Elevation Beyond Safe Working Limit 24
Warning Angle Sensors Not Calibrated F53 R113
Stability Warning F29 R32
Stability Alarm F27 F30
Offside Stability Alarm F28 R31
Stabiliser Not Deployed – Arm Function Disabled F33 R34
Load On Lifting Pin – Stabilisers Cannot Be Deployed F37 R38
Module Off Station – Stabilisers Cannot Be Deployed F39 R40
Stabiliser Deployed – Traverse Function Disabled F45 R44
Stabiliser not angled enough F69 R70
Ankle not extended enough F71 R72
Ankle Retract Sensor Error F104 R105
Ankle Extend Sensor Error F106 R107
Joystick Error Reported L65 R66
No Joystick Data Received 64
Mode Select Switch Error 75
Front Crane Has Lost Communication with Engine ECU 95
Diesel Engine Oil Pressure too low 100
Diesel Engine Water Temperature too High 99
Alternator Not Charging 109
Trailer Park Brake Not Applied 110
Top Lift Frame - Twistlock Switch Error FR120 FL121 RR 122 RR 123
Top Lift Frame - Contact Sensor Error FR124 FL125 RR126 RL127
Top Lift Frame – Twistlocks Are In-between Open and Closed 128
Top Lift Frame Is Not Fitted 129
Max Rated Load Exceeded 58
Stabiliser Extension Magnetic Counter Sensor F130 R131
Angle Sensor Calibration Failure
