June 2012 PDF File |
Technical Bulletin |
Version 1 |
Author: Mike Parker |
All software now has a part number.
All Crane, Runtime and Display software now has a part number.
All software starts with the prefix "SW-" followed by a 5 digit code followed by a Major revision number then the description.
There are currently three software types:
An example of the format of a run time software identifier is shown below. It has a different revision number format to other software as it is vendor supplied.
SW-xxxxx RTS esx cmoco V307
The parts of the Run Time Software Part format are:
Part |
Description |
"SW-" |
Identifies this is a Software Part |
xxxxx |
Part number |
"RTS" |
Identifies this is Run Time Software |
"esx" |
The controller type the software is for |
"crnoco" |
System specific details |
"V307" |
Version number |
An example of the format of a ESX crane control software identifier is shown below.
SW-xxxxx-5 ESX 362 RHL LM S2 PP HZ RS v01
The parts of the ESX Crane Control Software format are:
Part |
Description |
"SW-" |
Identifies this is a Software Part |
"xxxxx" |
Part number |
"5" |
Major Version number |
"ESX" |
Identifies that the software is for an ESX controller. |
"362" |
Crane model |
"RHL" |
Lifting side (LHL or RHL) |
"LM" |
Control type (LM or DC) |
"S2" |
Model series |
"PP" |
Power source (PP=Powerpack, PTO=Power Take Off) |
"HZ" |
Type of stabiliser.(HZ is the standard horizontal stabiliser) |
"RS" |
Type of traverse system (RS = Ram Shift, R&P=Rack and Pinion) |
"v01" |
Minor version number. |
The version is split into two sections, major and minor. In the above example 501 is Major Version 5, Minor Version 01
Current LM Version |
New LM Version |
v3.47 |
v4.01 |
v3.39 |
v5.01 |
New version v5.01 has the LETT65 coil wiring modifications.
Current DCVersion |
New DC Version |
v3.38 |
v4.01 |
v3.39 |
v5.01 |
New version v5.01 has the LETT65 coil wiring modifications.
See Document "SOFTWARE CONFIGURATION LIST ESX" for details on the software description details.
The display software part number is set up as per the example below.
SW-xxxxx-1 Display LM EN FR NL CZ DE SE v01
The parts of the above format are:
Part |
Description |
"SW-" |
Identifies this as a software part |
"xxxxx" |
Part number |
"1" |
Major version number |
"Display" |
Identifies software as being for the display |
"LM" |
Control type (LM or DC) |
"EN FR ..." |
Langauages included in this display software |
"v01" |
Minor version number |
The version is split into two sections, major and minor. In the above example it is major version 1 minor version 01 which gives version 101.
Old Version |
New Version |
TOS Version |
Load Monitoring Rev. C |
SW_42106_1_Display_LM_EN_FR_NL_CZ_DE_SE_v01.DAT |
191 |
Load Monitoring Rev.D |
SW_42106_2_Display_LM_EN_FR_NL_CZ_DE_SE_v01.DAT |
393 |
Refer to TB0081 for further details.
All currently manufactured smartlift and DC models.
Some earlier models. See full list of available programs in document "ESX Program List.pdf" in the Software release folder. See TB0085 for more details.
Other crane models that are not listed may be available on request.
Download the Crane software as per "SL0027 Updating Front and Rear ECU Programmes with SW part numbers"
Download the Display software as per "SL0003 Updating LCD Display Pages V2"
See TB0084 for Crane software backwards compatibility
See TB0082 for the Display software backwards compatibility.