Hydraulic System

• Check all hydraulic hoses and pipe work for wear, scuffing and fretting
• Check the mountings of the hydraulic reservoir for condition and security
• Change the following filters where applicable:
  • Engine oil
  • Engine fuel
  • Hydraulic oil tank
  • Hydraulic oil pressure
• Change the oil in the power pack engine
• Clean the hydraulic tank breather element
• Change the hydraulic oil if required. If water contamination is present oil should be changed. See hydraulic oil change guide at the end of the maintenance section of this manual
• Check fan belt tension
• Check condition of radiator hoses.
• Check engine coolant for condition as detailed in Kubota Operators Manual. If you need to refill the coolant then ensure the air is bled from the coolant system after filling:
  • After filling run the engine at a low idle with the radiator cap removed until the engine reaches normal operating temperature.
  • Replace the cap and let the engine cool
  • Check coolant level in the radiator after the engine has cooled and top up if necessary.
• Check battery fluid levels