Previous Topic

Next Topic

Book Contents

Book Index

Send Feedback

Operator Controls - HBC

The operator controls for the HBC remote control transmitter are shown below.

Top View Controls

Function Switch

4 position switch for Off / Traverse Mode / Stabiliser Mode / Arms Mode

Fast / Slow Switch

2 position toggle switch to select Hi or Low speed hydraulic operation

LED Indicator

Flashes red when battery requires charging. Flashes rapidly green when making contact with the receiver. Flashes slowly green when communicating with the receiver.

Right Side Controls

Horn Button

Press to sound the warning horn

Transmitter Restart

Start the remote control transmitter if it has powered down

Emergency Stop

Press to stop all operations. To restart operations the Emergency Stop button must be rotated clockwise to release it.

Left Side Controls

Light Switch

Turns on / off the lights on the lifter arms

Powerpack Start

Starts / stops the hydraulic power pack.

Ion Device

This screw-in plug identifies the remote control with the receiver and disables controller if removed.

See Also

Operator Controls

Joystick Controls

Operator Controls - Analogue