16 Mar 1999 PDF File |
|
|
The early version Series 1 remote units were fitted to machine serial No SB4451-701 through to serial No 4710-724 and are identified by the round multi pin plug for the remote cable connection.
The series 2 remote units were fitted to machines serial No 4689-725 through to serial No 5594-929 and are identified by an oblong multi pin plug for the remote cable connection.
Series 3 remote units have been fitted from serial No 5598-930 onward to SB360, SB300 and SB330 units. These are identified by the wired in remote cable with a "Female" oblong plug on the cable end.
A Series 2C remote unit has been introduced as a replacement field units and is available in a complete assembly form with or without joysticks. This remote unit is based on the Series 3 units which have proved to be robust and more reliable then the Series 2 units.
The outward appearance is very similar to series 3 units in that they share the same basic components. The physical differences are the "Male" oblong plug on the cable end and two internal mounted relays which keep the unit compatible with the main control box Series 2 wiring and plug base connection. The remote box lid has a yellow band with "Series 2C only" written in black for identification.